Mercedes-Benz E-Class Owner's Manual page 245

X
360° camera
Select
firm.
The following appears depending on
whether transmission position D or R is
selected:
a split-screen with top view and the
R
image from the front camera or
a split-screen with top view and the
R
image from the reversing camera
For further information on the COMAND con-
troller; see the separate COMAND Online
operating instructions.
Activating the 360° camera using
reverse gear
You can show images from the 360° camera
automatically by engaging reverse gear.
X
Make sure that the key is in position 2 in
the ignition lock.
X
Make sure that the
gear
setting is active in COMAND Online,
see the separate COMAND Online operat-
ing instructions.
X
To show the 360° camera image: engage
reverse gear.
The area behind the vehicle is shown in the
COMAND display in split-screen mode. You
see the top view of the vehicle and the
image from the reversing camera.
Selecting the split-screen and full
screen displays
X
To switch between split screen views:
switch to the line with the vehicle icons by
sliding ZV the COMAND controller.
X
Turn cVd the COMAND controller and
select one of the vehicle icons.
X
To switch to full screen mode: select
Full screen
by turning cVd the
COMAND controller and press W to con-
firm.
i The full screen option is only available in
the following views:
and press W to con-
Activation by R
top view with image from the reversing
R
camera
top view with image from the front cam-
R
era
Displays in the COMAND display
Important safety notes
The camera system may show a distorted
view of obstacles or show them incorrectly or
not at all. Obstacles are not shown by the
system in the following locations:
under the front and rear bumpers
R
very close to the front and rear bumpers
R
in the area immediately above the tailgate
R
handle/boot lid handle
very close to the exterior mirrors
R
in the transitional areas between the vari-
R
ous cameras in the virtual top view
! Objects not at ground level may appear to
be further away than they actually are, e.g.:
the bumper of a parked vehicle
R
the drawbar of a trailer
R
the ball coupling of a trailer tow hitch
R
the rear section of an HGV
R
a slanted post
R
Use the guidelines only for orientation.
Approach objects no further than the bot-
tom-most guideline.
Driving systems
243
Z