Before Using This Printer - Sony UP-D72XRS Read Before Use

1
Loosen the screws which secure the fan cover, and
move the loosened screws toward the left and right
respectively. Then remove the fan cover with the
filter.
Filter
Fan cover
2
Clean the fan using a vacuum cleaner or the like.
Notes
• Be careful that the filter does not get caught in the
vacuum cleaner.
• Do not rub the net of the filter roughly.
3
Reset the filter and the fan cover on the side panel
as they were, using the screws loosened in step 1.
Specifications
Power requirements
100 to 120 V AC, 50/60 Hz
(for 100 to 120 V AC users)
220 to 240 V AC, 50/60 Hz
(for 220 to 240 V AC users)
Input current 2.9 A (for 100 to 120 V AC users)
1.3 A (for 220 to 240 V AC users)
Operating temperature
10°C to 30°C (50°F to 86°F)
Operating humidity
20% to 80% (no condensation allowed)
Storage and transport temperature
–20°C to 60°C (–4°F to 140°F)
Storage and transport humidity
20% to 90% (no condensation allowed)
Dimensions About 412 × 210 × 431 mm (w/h/d)
(16 3/8 × 8 3/8 × 17 inches)
Mass Approx. 15.5 kg (34 lb 3 oz)
Printing system Thermal printing
Thermal head 2,560 elements, 11.8 dot/mm (300dpi)
Gradations 512 levels
Maximum print size
232.2 × 196.4 mm
Picture elements
2,743 × 2,320 dots (w/h)
Printing time Approx. 40 seconds
Interface PARALLEL DATA (IEEE1284) × 1,
(Amphenole 36-pin connector)
Special connector × 1
a) Currently, this connector is not used. It is
reserved for future use.
Accessories supplied
Paper tray (1)
Thermal Head Cleaning Kit (1)
Thermal printing paper UPP-725 (1)
Cleaning sheets (2)
Tray guide cover (1)
AC power cord (1)
Connecting cable (1)
Floppy disk (1)

Before Using this Printer (1)

CD-ROM (1)
b) When you use the printer in the European
countries, use the AC power cord supplied.
When you use the printer in a country
other than the European countries, use the
proper AC power cord for your local
power system.
Accessories supplied separately
Thermal printing paper UPP-725
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water: Ordinary
a)
b)
7
Specifications