Tools - Husqvarna DMS 240 Workshop Manual

The tools below can be obtained from Husqvarna.
●
523 05 77-02
Socket for hook nut
● Adjustment of the gear box's
slip clutch.
581 54 15-01
Multimeter
Make: Amprobe 37XR-A.
One of few universal instru-
ments that can also measure
inductance (H, Henry).
Checking of the electric motor's
●
functions.
Workshop wrench, Allen
● Universal use.
502 50 19-01 3 mm
502 50 18-01 4 mm
502 50 64-01 5 mm
504 90 00-01 6 mm
502 71 27-02
Workshop wrench, Torx T27
● Universal use.
504 90 00-06
Workshop kit,
mm dimensions
Universal use.
●
Allen: 3, 4, 5 and 6 mm
Socket: 8 mm
504 90 90-02
Universal puller
● Bearing dismantling.

TOOLS

= Service stage
The special tools below are needed for service work to DMS 240
but are not sold by Husqvarna.
Counter stay device
There are a number of manufacturers, e.g.: Kukko (Germany),
Snap-On (USA).
● Removal of ball bearings from the gear housing and cover.
16
27