Table of Contents
Advertisement
9.
Tighten the screw that secures the lamp.
•
Loose screw may cause a bad connection,
which could result in malfunction.
•
Do not over tighten the screw.
10.
Ensure the handle is fully laid flat and
locked in place.
11.
Replace the lamp cover on the projector.
12.
Tighten the screws that secure the lamp
cover.
•
Loose screw may cause a bad connection,
which could result in malfunction.
•
Do not over tighten the screws.
13.
Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
14.
After the startup logo, open the On-Screen
Display (OSD) menu. Go to the SYSTEM
SETUP: Advanced > Lamp Settings menu.
Press Mode/Enter. The Lamp Settings page
displays. Press
timer and press Mode/Enter. A warning
message displays asking if you want to reset the lamp timer. Highlight Reset and press
Mode/Enter. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
54
Maintenance
to highlight Reset lamp
Notice
Reset Lamp Timer?
Reset
Cancel
Hide quick links:
Advertisement
Table of Contents
