BenQ MP512 ST User Manual page 46

FUNCTION
(default setting/
value)
Blank Timer
(Disable)
Panel Key
Lock
(Off)
Sleep Timer
(Disable)
Splash
Screen
(BenQ logo)
Quick
Cooling
(On)
High Altitude
Mode
(Off)
Audio
Settings
Menu
Settings
Standby D-
Sub Output
(Off)
46 Operation
DESCRIPTION
(default setting/value)
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
page 37 for details.
Disables or enables all panel key functions except
projector and keys on the remote control. See
on page 38 for details.
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Allows you to select which logo screen will display during projector
start-up. Three options are available: BenQ logo, Black screen, or Blue
screen.
Selecting On enables the function and the projector cooling time will
be shortened to a few seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
A mode for operation in high altitude areas. See
altitude environment" on page 39
Mute (Off)
Volume (5)
Power on/off ring tone (On)
See "Adjusting the sound" on page 39
Menu display time (15 sec)
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position (Center)
Sets the On-Screen Display (OSD) menu position.
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the D-SUB IN and D-SUB OUT
sockets are correctly connected to devices. See
on page 18 for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
"Hiding the image" on
I
I
Power on the
"Locking control keys"
"Operating in a high
for details.
for details.
"Connecting a monitor"