Specifications - Delta AC MAX Installation And Operation Manual

7

Specifications

Version
Charging mode
Charging interface
Input/output rating
Input wiring
Standby power
Altitude
Internal residual current detection
Surge protection
Electrical protection
Cold load pick-up
Status indicators
Network interface
Charging protocol
Card reader
Operating temperature
Storage temperature
Relative humidity
Length of charging cable
Ingress protection
Impact protection
Cooling
Dimension (H x W x D)
Net weight
Compliance/ certificate
*Depends on model configuration
Smart
Mode 3
IEC 62196-2: Type 1 plug, Type 2 plug, Type 2 socket, or Type 2
socket with shutter
220-240 Vac, single phase, 16A or 32 A max., 50-60 Hz
380-415 Vac, three phase, 16A or 32 A max., 50-60 Hz
Single phase: L1, N, PE
Three phase: L1, L2, L3, N, PE/ L1, L2, L3, PE (IT)
< 5 W*
2000m
AC 30mA, DC 6mA
Class II
Over current protection, short circuit protection, over voltage
protection, under voltage protection, ground fault protection, surge
protection, over temperature protection
Randomized delay between 5 and 100 seconds before the charge
resume after power outages.
Blue, green, red, yellow
Bluetooth, Ethernet, wifi or cellular
OCPP 1.6J
RFID card reader compliant to ISO/IEC 14443 A/B
-30 ℃ to +50 ℃ ( -22 ℉ to +122 ℉)
-40 ℃ to +80 ℃ (-40 ℉ to +176 ℉)
< 95%, non-condensing
5 m, straight cable
IP55
IK09
Natural cooling
371 x 218 x 167 mm (14.6 x 8.6 x 6.6 inch), excluding charging
cable, mounting bracket and cable holder
3.9 kg*
CE, UKCA
34
v1.0.0