Controlling The Player By Another Unit - Sony CDP-CX455 Primary Operating Instructions Manual

Using the Player with Another Component
3
Press H to start playing.
The MEGA CONTROL button lights up when a
track in the second player is selected.
To cancel No-Delay/X-Fade Play
Press the corresponding button repeatedly until "NO
DELAY" or "X-FADE" disappears from the display. The
current player continues playing.
z
You can change the method (No-Delay or X-Fade)
during play
Press the corresponding button (NO DELAY or X-FADE)
following the procedure in step 2.
z
You can start X-Fade at any point of the track
Press FADER during X-Fade Play.
Even after you have set the X-Fade mode and started
X-Fade play, you can start X-Fade manually at any point
you like. Note that you cannot do this operation while
the sound from both players is mixed.
Notes
• Play starts from the second player if you start play while
the MEGA CONTROL button is lit.
• When one player has played all the discs or tracks in the
player ahead of the other player, play stops.
• Do not use the controls on the second player during
No-Delay/X-Fade Play. They may not work correctly.
US
32
Controlling the Player by
Another Unit
When you connect the player to a Sony MD deck
compatible with the Mega Control function, or operate
a Sony MD deck by using computer software such as
"MD Editor," you must set the player as described
below:
MENU/NO
1
Press MENU/NO.
2
Turn the JOG dial until "CONTROL A1 ?" appears
in the display window.
3
Press YES.
"CONTROL A1??" appears in the display.
4
Press YES.
To return to normal setting
After following steps 1 and 2, and "CONTROL A1II ?" is
displayed, then press YES.
Notes
• You can perform the operation above correctly only when
you operate Disc 1 to Disc 200.
• You cannot operate this player correctly from another
player that does not have the CONTROL A1II jack. In this
case, operate the other player from this player.
YES JOG