Controlling The Player By Another Unit - Sony CDP-CX450 Operating Instructions Manual

3
Press H to start playing.
The MEGA CONTROL button lights up when a
track in the second player is selected.
To cancel No-Delay/X-Fade Play
Press the corresponding button repeatedly until "NO
DELAY" or "X-FADE" disappears from the display. The
current player continues playing.
z
You can change the method (No-Delay or X-Fade)
during play
Press the corresponding button (NO DELAY or X-FADE)
following the procedure in step 2.
z
You can start X-Fade at any point of the track
Press FADER during X-Fade Play.
Even after you have set the X-Fade mode and started
X-Fade play, you can start X-Fade manually at any point
you like. Note that you cannot do this operation while
the sound from both players is mixed.
Notes
• Play starts from the second player if you start play while
the MEGA CONTROL button is lit.
• When one player has played all the discs or tracks in the
player ahead of the other player, play stops.
• Do not use the controls on the second player during
No-Delay/X-Fade Play. They may not work correctly.
Storing Information About CDs (Custom Files) Using the Player with Another Component
Storing Information About CDs (Custom Files)
Controlling the Player by
Another Unit

Controlling the player by another unit

When you connect the player to a Sony MD deck
compatible with the Mega Control function, or operate
a Sony MD deck by using computer software such as
"MD Editor," you must set the player as shown below:
I / 1
1
Press MENU/NO.
2
Turn the JOG dial until "CONTROL A1 ?" appears
in the display window.
3
Press YES.
To return to normal setting
After following steps 1 and 2, and "CONTROL A1 ?" is
displayed, then press YES.
Notes
• You can perform the operation above correctly only when
you operate Disc 1 to Disc 200.
• You cannot operate this player correctly from another
player that does not have the CONTROL A1 jack. In this
case, operate the other player from this player.
MENU/NO
YES JOG
43