Sony CDP-CX455 Primary Operating Instructions Manual page 24

Storing Information About CDs (Custom Files)
4
Turn the JOG dial until the desired character
appears in the display.
The cursor disappears and the first space for the
Disc Name flashes.
As you turn the JOG dial clockwise, the characters
appear in the following order. Turn the JOG dial
counterclockwise to go in reverse order.
(space) A B C D E F G H I J K L M N O P Q R S T U
V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w
x y z 0 1 2 3 4 5 6 7 8 9 ' – / , . ( ) : ! ? & + < > _ = " ;
# $ % @ * `
2nd NEXT DISC ART.
S * * * * * * * *
ALL 1 DISC S SHUFFLE
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT NO DELAY
5
Push the JOG dial to select the character.
The selected character lights up, and the flashing
cursor appears at the next space to be input.
2nd NEXT DISC ART.
S * * * * * * * *
ALL 1 DISC S SHUFFLE
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT NO DELAY
To make a correction
Move the cursor to the position that you want to change,
then press CLEAR and begin again by inputting the
correct characters.
6
Repeat steps 4 and 5 to input more characters.
7
Press YES to store the Disc Name.
The display shows the Disc Name.
2nd NEXT DISC ART.
S O N Y H I T
ALL 1 DISC S SHUFFLE
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT NO DELAY
Repeat steps 1 to 7 to assign Disc Names to other
discs.
z
To change the character type quickly while inputting
characters
Press DISPLAY in step 4 above. The character on the
cursor changes to the first character of each character
type. Each time you press DISPLAY, the character type
changes as follows:
t A t a
US
24
HIT TRACK GROUP ART. MIN STEP SEC
* * * *
REPEAT 1 GROUP
CD1 CD2 CD3
HIT TRACK GROUP ART. MIN STEP SEC
* * * *
REPEAT 1 GROUP
CD1 CD2 CD3
HIT TRACK GROUP ART. MIN STEP SEC
S * * * * *
REPEAT 1 GROUP
CD1 CD2 CD3
t 0 t ' t (space)
Changing the Disc Name
1
Follow steps 1 to 3 in "Labeling discs on the
player" on page 23 to select the Disc Name you
want to change.
2
Turn the l AMS L dial to move the cursor to
the position you want to change.
When the cursor position is on a character, the
character flashes but when the cursor position is
on a blank space, the flashing cursor ( ) appears
in the display.
To change characters
Turn the JOG dial until the desired character
appears in the display.
To add characters
Push the JOG dial. The new blank space appears
next to the selected character, then turn the JOG
dial until the desired character appears in the
display.
To erase characters
Press CLEAR. The selected character disappears.
3
Repeat step 2 to change more characters.
4
Press YES to store the Disc Name.
Erasing the Disc Name
1
Follow steps 1 to 3 in "Labeling discs on the
player" on page 23 to select the Disc Name you
want to erase.
2
Turn the l AMS L dial to move the cursor to
the first character, then press and hold CLEAR
until all the characters are erased.
3
Press YES.
The Disc Name disappears.