Specifications - Sony CDP-CE500 Operating Instructions Manual

Specifications

CD player section
Laser
Frequency response
Dynamic range
Harmonic distortion
Laser Diode Properties
* This output is the value measurement at a
distance of 200 mm from the objective lens
surface on the optical pick-up block with 7 mm
aperture.
USB section
Supported bit rate
Sampling frequencies
USB port
Sony Corporation
Printed in Malaysia
Semiconductor laser (λ =
780 nm)
Emission duration:
continuous
2 Hz to 20 kHz ± 0.5 dB
More than 90 dB
Less than 0.006%
Emission Duration:
Continuous
Laser Output: Less than
44.6 μW
MP3 (MPEG 1 Audio
Layer 3): 32 kbps – 320
kbps, VBR
WMA: 48 kbps – 192 kbps
AAC: 48 kbps – 320 kbps
MP3 (MPEG 1 Audio
Layer 3): 32 kHz/
44.1 kHz/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
Maximum current:
500 mA
(1)
Outputs
Jack type Maximum
output level
ANALOG Phono 2 V (at 50
OUT jacks kilohms)
DIGITAL Optical –18 dBm
OUT output
OPTICAL jack
General
Power requirements
Power consumption
Dimensions (approx.)
(w/h/d)
Mass (approx.)
Supplied accessories
Audio cord
Remote commander
Battery
Design and specifications are subject to change
without notice.
• Standby power consumption: 0.3 W
• Halogenated flame retardants are not used in the
certain printed wiring boards.
Load
impedance
Over 10
kilohms
Wave
length:
660 nm
120 V AC, 60 Hz
16 W
430 mm × 110 mm ×
400 mm
(17 in × 4 3/8 in ×
15 3/4 in) incl. projecting
parts
5.2 kg (11 lbs 1 oz)
Red and white (1)
RM-ASU100 (1)
R6 (size-AA) (2)