Playback; Playing A Cd/Mp3 Disc - Sony CDP-CE500 Operating Instructions Manual

Playback

Playing a CD/MP3 Disc

1
Press ?/1.
2
Press CD.
For operation via the player, press CD/USB
repeatedly to select the CD mode.
3
Press Z, and place a disc on the disc
tray.
With the label side up
4
To load other discs, press DISC SKIP
repeatedly and place the discs in the
order you want to play them.
Each time you press the button, the disc tray
turns and you can place a disc in an empty
disc compartment. The player plays the disc
in front of you first.
5
Press Z to close the disc tray.
6
Press N.
Playback starts.
US
10
Disc number
Other operations
To Press
Pause playback X. To resume playback, press the
button again.
Stop playback x.
Select a folder on CONTINUE repeatedly to display
an MP3 disc " ," and then FOLDER +/–
repeatedly.
Select a track/file ./>. To select a track/file
directly, press the number
button(s), and then press ENTER.
Find a point in a Hold down m/M during
track/file
playback, and release the button
at the desired point.
Change the SHUFFLE (page 17), PROGRAM
playback mode (page 17), REPEAT (page 19), or
CONTINUE (page 16). For
details, see the pages in
parentheses.
Select a disc DISC 1-5 (or DISC SKIP
repeatedly).
Go to the next DISC SKIP.
disc
Switch to the CD DISC 1-5.
function from the
USB function
Exchange other EX-CHANGE on the player. For
discs while details, see "Replacing discs while
playing playing a disc" (page 11).
Eject discs Z.
Auto standby
The player enters standby mode automatically
when playback is paused or stopped without any
operation for more than about 30 minutes.
"AUTO STBY" flashes on the display for 2
minutes before the player enters standby mode.