Dodge CHARGER 2021 Owner's Manual page 280

278 IN CASE OF EMERGENCY
3. Remove the plastic cover under the bin by
using the slot provided to access the
Manual Park Release lever.
4. Using a small screwdriver or similar tool,
fish the tether strap up through the opening
in the console base.
5. Press and maintain firm pressure on the
brake pedal.
6. Insert the screwdriver into the slot in the
center of the lever, and disengage the lever
locking tab by pushing it to the right.
Engaging The Lever
7. While holding the locking tab in the
disengaged position, pull the tether strap to
rotate the lever up and rearward, until it
locks in place in the vertical position. The
vehicle is now out of PARK and can be
moved. Release the parking brake only
when the vehicle is securely connected to a
tow vehicle.
To Reset The Manual Park Release:
1. Push the latch (at the base of the lever, on
the rear side) rearward (away from the
lever) to unlatch the lever.
Disengaging The Lever
2. Rotate the Manual Park Release lever
forward and down, to its original position,
until the locking tab snaps into place to
secure the lever.
3. Pull up gently on the tether strap to confirm
that the lever is locked in its stowed
position.
4. Tuck the tether strap into the base of the
console. Reinstall the Manual Park Release
cover and the console storage bin.
When the lever is in the release position the
access cover cannot be reinstalled.