Set And Forget Memory; Reset To Factory Settings; Drk (Bright/Dim/Dark) Button - Beltronics Vector 985 Operating Instructions Manual

Set and Forget Memory

k
Any time VECTOR 985 is turned off or unplugged
from the cigarette lighter socket, all feature settings
you have selected are retained in the unit's memory.
Set and Forget Memory eliminates the need to reset
your preferred feature settings each time your unit is
turned off and then back on.
k

Reset to Factory Settings

You can reset your unit to factory settings for Start-Up
mode, volume, DRK, AUD, CTY and General Selectable
Features. To reset, press and hold the CTY button until
the display shows
your unit will cycle through the
Mode.

DRK (Bright/Dim/Dark) Button

k
The DRK button allows selection of a bright, fully
adjustable dim or dark mode. VECTOR 985 is
factory preset to full bright display. To engage dim
mode, press and hold the DRK button. The display
will cycle through various levels of dim illumination.
Release the button at your chosen level. To engage
dark mode, press the DRK button a second time. A
single "beep" coupled with the brief illumination of
" "
D D A A R R K K
You'll notice an
mode),
dim to confirm your unit is receiving power. To
return to a full bright setting, press the DRK button
a third time; two "beeps" confirm this selection. Use of
the DRK button does not affect audio alerts.
Important—if you press the the DRK button and do not
receive audible confirmation, the audio level has been set
too low.
8
R R E E S S E E T T
"
on the display confirms your selection.
" "
A A s s
" "
(City mode) or
C C x x
Two "beeps" will sound and
".
N N O O R R M M A A L L
(AutoScan ™ ),
" "
(City ALL) remains
C C A A
Start-Up
" "
(Highway
H H