Table of Contents
Advertisement
Web monitor
After installing this product to the network, open the monitor window of this product with a
Web browser.
In the web monitor, it is possible to confirm the condition of a UPS and set various setting.
① Startup the Web browser and enter the IP address of this product in the address bar.
The factory default value of this product is "192.168.2.150".
※If you changed the "IP address" in "Network settings", enter the changed "IP address".
② Click the [Login] button in the Web monitor window.
③ Enter the username and password in the login window and click "Log in."
The username and password can be changed in [Card management] ->
[Authentication Configuration]->[Administrator Setting] on the Web monitor
window.
(Initial Value)
Username
OMRON
Password
admin
11
Advertisement
Table of Contents
