Safety Notes - Baxi DN 25 Installation And Operating Instructions For The Specialised Installer

1.5 Pictograms
The following symbols and pictograms are used in
these installation and operating instructions:
Warning symbol for possible injuries to
persons
Warning symbol for possible injuries to
persons (on a white background)
Danger from hot liquids
Danger from hot surfaces
Danger from electric voltage
Disconnect the power supply before
starting work
Prohibition sign
Mandatory sign
Note, information, recommendation
Wear safety gloves
Wear helmet
Wear safety goggles
Wear safety shoes
No potable water
2

2 Safety notes

2.1 Correct use
Safety in operation is only guaranteed if the solar
station is used correctly. The solar station is installed
in the return of the solar circuit and is designed for the
connection of the storage cylinder to the collector.
Any use of the solar station outside the above
applications will be considered as non-compliant and
misuse. Claims of any kind against the manufacturer
and/or his authorised representatives due to damages
caused by incorrect use cannot be accepted.
The observance of the installation and operating
instructions is part of the compliance terms.
When using a solar station with electronic flow sensor,
the installation of a filling and flushing device is
recommended.
Suitable measures for thermal protection have to be
taken in order to protect the solar station from a
penetration of steam causing damage to the
components (e.g. central roof heating systems with
short pipes).
Provide an in-line tank, if required.
2.2 Possible dangers at the installation location
and during transport
The case of an external fire has not been taken into
consideration when constructing the solar station.
WARNING
Heavy solar station
Risk of injury Suitable transport and lifting
devices are to be used. Wear suitable
protective clothing (e.g. safety shoes)
during installation and use safety devices.
External components like handwheels or
pressure test points must not be misused
for the absorption of external forces, e.g.
as connection point for lever tools etc.
Hot or cold surfaces
Risk of injury Do not touch the solar
station without safety gloves. It may get
very hot or cold during operation.
Sharp edges
Risk of injury Only touch with safety
gloves. Threads, bore holes and edges are
sharp.