Advertisement
Quick Links
RK5000 INSTRUCTIONS
RK5000 Product Inventory
Lacing Bar (1)
10-32 Spring Nut (4)
10-32 x 1 Screw (4)
#10 Flat Washer (4)
Instructions
1. Hold lacing bar against the slotted horizontals and find three mounting points.
2. Install 10-32 spring nut by holding it horizontally in the slotted horizontal, pushing and turning it
clockwise into a vertical position.
3. Repeat step two so that you have three spring nuts in place.
4. Use 10-32 screw and flat washer and install lacing bar.
All trade names are registered trademarks of respective manufacturers listed.
RK5000 Instructions
10-32 Spring Nut
www.belkin.com
Belkin Corporation
501 West Walnut Street
Compton, CA 90220-5221, USA
Tel: 310-898-1100; Fax: 310-898-1111
© 2005 Belkin Corporation. All rights reserved.
Page 1
10-32 x 1 Screw
#10 Flat Washer
P35752
Advertisement
