Belkin P35727ec Instructions Manual

RK2000ek and RK2001ek INSTRUCTIONS

RK2000ek Product Inventory

Vertical Upright Channel 84"(2134mm) (2)
Base Angle (2)
Top Angle (2)
1/2" (13mm) - 13 x 1 Hex Bolt (12)
1/2" (13mm) Lock Washer (12)
12-24 x 1/2" (13mm) lg. Screws (50)

Tools Required

3/4"(20mm) Socket or Wrench
Level or Carpenter Square
Instructions
1. Install top angles to vertical upright channels.
a. Lay vertical upright channels on edge so
tapped holes face you and the floor. Be
sure open sides of upright channels face
each other.
b. Align holes in top angle with
corresponding holes in vertical uprights.
Formed leg of top angle should be facing
toward you.
c. Install hex head bolts and lock washers.
Finger tighten only.
d. Turn vertical upright over (rotate 180
degrees) and repeat steps (a) through (c).
Finger tighten only.
Belkin Tech Support
Europe: 00 800 223 55 460
For other languages: www.belkin.com/support
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2005 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
RK5000ek RK2001ek Instructions
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk,
The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax

RK2001ek Product Inventory

Vertical Upright Channel 48" (1220mm) (2)
Base Angle (2)
Top Angle (2)
1/2" (13mm) - 13 x 1 Hex Bolt (12)
1/2" (13mm) Lock Washer (12)
12-24 x 1/2" (13mm) lg. Screws (50)
Belkin GmbH
Hanebergstrasse 2
80637 Munich,
Germany
+49 (0) 89 143405 0
+49 (0) 89 143405 100 fax
Top Angle
Belkin SAS
130 rue de Silly
92100 Boulogne Billancourt,
France
+33 (0) 1 41 03 14 40
+33 (0) 1 41 31 01 72 fax
P35727ec
EN
DE
FR