Belkin RK5020 Instructions

RK5020 INSTRUCTIONS

RK5020 Product Inventory

Shelf Assembly (1)
M6 Cage Nut (8)
M6 Screw (8)

Installing Your RK5020 Sliding Shelf

1. Measure the distance from the front of the front rail to the back of the back rail.
2. Loosen the rear tabs on the shelves, adjust to distance measured in step 1 and tighten screws.
Note: Maximum tab placement for the RK5020 is 36 inches.
3. Locate position of shelf on rail and insert your M6 cage nuts (8).
4. Mount shelf using the M6 screws supplied.
All trade names are registered trademarks of respective manufacturers listed.
RK5020 Instructions
www.belkin.com
Belkin Corporation
501 West Walnut Street
Compton, CA 90220-5221, USA
Tel: 310-898-1100; Fax: 310-898-1111
© 2005 Belkin Corporation. All rights reserved.
Page 1
Tab Screw
Shelf Tab
P35780