Advertisement
Belkin Secure KVM Under Desk Mount Quick Start Guide
F1DN-KVM-MOUNT:
The Belkin Secure KVM Under Desk Mount is designed for quick deployment and attaches to the KVM via tension.
There are no screws required to fasten the KVM to the bracket.
Included Contents:
1 SKVM Under Desk Mount
4 ¾-inch screws
Pre-Installation Guidelines
Determine where you will be placing the mount and orientation of the mount. (see
•
below)
Mounting under the desk
•
Ensure the mount will be installed on a flat, clean, and dry surface. This mount is not intended for
exposed outdoor installation.
Ensure that maximum distance between the KVM mount and each computer does not exceed your
•
cabling lengths.
•
Ensure that the keyboard, mouse, and display cables will reach the mounted KVM.
•
Ensure that the KVM port buttons are easily visible and accessible by the intended user.
•
Ensure that the included screws are adequate size and type for the designated installation area.
Secure KVM Switch
(Replacement for F1D006 and F1D008)
KVM mounting options
Desktop
Mounting vertically on the side
8820-00349 Rev A00
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Belkin F1DN-KVM-MOUNT
Summary of Contents for Belkin F1DN-KVM-MOUNT
- Page 1 Belkin Secure KVM Under Desk Mount Quick Start Guide F1DN-KVM-MOUNT: (Replacement for F1D006 and F1D008) The Belkin Secure KVM Under Desk Mount is designed for quick deployment and attaches to the KVM via tension. There are no screws required to fasten the KVM to the bracket. Included Contents: 1 SKVM Under Desk Mount 4 ¾-inch screws...
- Page 2 Secure KVM Switch Installation Once you have determined the location, screw the mount to the desk using the screws provided. Mounting the KVM 1. Connect all necessary cables to the back of the KVM. 2. With the KVM forward facing, align the rails to the side-tracks on the KVM. 3.
Need help?
Do you have a question about the F1DN-KVM-MOUNT and is the answer not in the manual?
Questions and answers