Belkin RK5001 Instructions

RK5001 INSTRUCTIONS
RK5001 Product Inventory
Horizontal Waterfall Manager (1)
10-32 x 1/2 Screw (2)
10-32 Wing Nut (2)
Instructions
1. Locate the two mounting holes inside the rear top cross bracket of your Enclosure.
2. Line up your waterfall manager and place 10-32 screws through the mounting holes.
3. Start the wing nut and tighten.
All trade names are registered trademarks of respective manufacturers listed.
RK5001 Instructions
Rear of Enclosure
www.belkin.com
Belkin Corporation
501 West Walnut Street
Compton, CA 90220-5221, USA
Tel: 310-898-1100; Fax: 310-898-1111
© 2005 Belkin Corporation. All rights reserved.
Page 1
10-32 x 1/2
Screw
10-32 Wing
Nut
P35753