Keurig K-2500 Use & Care Manual page 10

K-2500™ BREWER
3
Heating...
Heat Up
Once the brewer fills the internal hot
water tank, it will begin heating the
water. The heating process will take
about three minutes. During this
time, the brewer's touch screen will
display "Heating..."
BEFORE YOU BREW, CONT.
4
Plumbed brewer shown
Lift & Lower
Place a mug on the drip tray plate
and then fully raise the handle.
Lower the handle to close the lid
over the K-Cup® pod holder.
NOTE: A K-Cup® pod should not be
used for this step.
5
Cleansing Brew
When prompted to select your
beverage, press 12 oz and then Brew
to start the cleansing brew. When
the cleansing brew is complete,
discard the hot water from the mug.
The brewer will enter its idle state
and will be ready to brew your first
K-Cup® pod.
CAUTION:
During the brewing process, there
is extremely hot water passing
through the K-Cup® pod holder. To
avoid injury, do not lift the handle
during the brewing process.
10