Concrete Curing Function; Entering Procedure - Samsung MIM-E03CN Installation Manual

Concrete curing function

When pipes of floor heating are installed, operation for reinforcing concrete curing is applied. (Period of operation: 23 days)

Entering procedure

1. After turning off the DIP switch K3 (3rd switch of SW03) of control kit (Default ON), turn off and turn on the control kit. The
operation for concrete curing starts automatically. (If blackout occurs and communictation restarts later, operation will
continue.)
2. Temperature of discharge water is controlled as time goes on like below.
[Temp.]
Initial
Classification
Heating
Time 96 72
Temperature 30 55
3. Remaining days are displayed on the wired remote controller during operation but key operation is unavailable.
Remaining days are
displayed.
❋ If an error is displayed, concrete curing function does not work.
Step raise
24 24 24 24
30 35 40 45
Concrete Curing
Remaining days:
Heating
24 144 24 24
50 55 50 45
[Day]
Total
Step down
(Hour)
24 24 24 552
40 35 30 -
37