Deflector Assembly - hergom E-10 PLUS Instructions For Installation, Use And Maintenance Manual

Table of Contents

Available languages

2 - DEFLECTOR ASSEMBLY

The baffle is a cast iron part that is located inside the stove, under the attachment ring

smoke exit, this part is delivered supported with some wooden blocks, to avoid it getting

loose and breaking the glass during transportation.

Should it be necessary to fit the deflector or replace it, during the stove's life, you must

proceed in the following way:

1º- Open the firebox Door.

2º- Take the baffle with the closed top part looking down (the small legs upwards) and the

semi open side towards the front of the stove (The baffle front).

3º- Lift the baffle and introduce its front small legs behind the front supports screwed to the

top of the stove.

4º- Horizontally move the baffle backwards, until it rests on the closed side upper edge on

the back supports (See Fig.-11)

Fig.13

Table of Contents