Craftsman CMHT77629 User Manual page 9

LASER
2
≤1mW @630~680 nm
IEC 60825-1:2014
Complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
• If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the
equipment may be impaired.
• Do not operate the laser in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. This tool may create sparks which may ignite
the dust or fumes.
• Store an idle laser out of reach of children and other
untrained persons. Lasers are dangerous in the hands
of untrained users.
• Tool service MUST be performed by qualified
repair personnel. Service or maintenance performed
by unqualified personnel may result in injury. To
locate your nearest CRAFTSMAN service center go to
www. CRAFTSMAN. com.
• Do not use optical tools such as a telescope or
transit to view the laser beam. Serious eye injury
could result.
• Do not place the laser in a position which may cause
anyone to intentionally or unintentionally stare into
the laser beam. Serious eye injury could result.
• Do not position the laser near a reflective
surface which may reflect the laser beam toward
anyone's eyes. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving the
laser on increases the risk of staring into the laser
beam.
• Do not modify the laser in any way. Modifying the tool
may result in hazardous laser radiation exposure.
CMHT77629
TYPE 1: 3VDC
Made in China
SER.
www.CRAFTSMAN.com
888-331-4569
• Do not operate the laser around children or allow
children to operate the laser. Serious eye injury may
result.
• Do not remove or deface warning labels. If labels are
removed, the user or others may inadvertently expose
themselves to radiation.
• Position the laser securely on a level surface. If
the laser falls, damage to the laser or serious injury
could result.
Personal Safety
• Stay alert, watch what you are doing, and use common
sense when operating the laser. Do not use the laser
when you are tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while
operating the laser may result in serious personal
injury.
• Use personal protective equipment. Always wear eye
protection. Depending on the work conditions, wearing
protective equipment such as a dust mask, non-skid
safety shoes, hard hat, and hearing protection will
reduce personal injury.
Tool Use and Care
• Do not use the laser if the Power/Transport Lock
switch does not turn the laser on or off. Any tool that
cannot be controlled with the switch is dangerous and
must be repaired.
• Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of electric
shock or injury.
E
9