Related Manuals for Eastwood 10049Z
Summary of Contents for Eastwood 10049Z
- Page 1 Eastwood Electroplating System Part #10049Z Batteries Are Not Included Operating Instructions © Copyright 2009 Easthill Group, Inc. Printed in the United States of America...
- Page 2 Read ENTIRE MANUAL before use! Read ALL safety and operating instructions before use. IMPORTANT SAFETY NOTICE* The Eastwood Tin-Zinc Plating System contains a mild acid solution. It is entirely safe when used correctly. The electroplating solution, known as “electrolyte,” contains sulfuric acid.
- Page 3 NOTE: For safety purposes, we recommend that you set up your plating only going to be as good as the preparation. The actual electroplating system as close as possible to a water source. Eastwood does not process is only the final step. Any flaws found in the part before plating recommend that you use your kitchen counter due to the proximity of are still going to be there after the plating, unless you prepare properly.
- Page 4 The system is not recommended for use over chrome plated parts or for large parts such as bumpers or wheels. For technical assistance e-mail: techelp@eastwoodcompany.com To order parts and supplies, call 1-800-345-1178 or visit www.eastwood.com...
- Page 5 Pack of 2 anodes (#10049A). If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 1-866-759-2131 email: techelp@eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA...