Electrical Connections - Wiring Diagrams - Joannes GIG K Series Installation & Maintenance

20

ELECTRICAL CONNECTIONS - WIRING DIAGRAMS

Perform connections of the circulators, burner and the room thermostat, if present, fol low ing the in struc tions
of the diagrams attached . Place a bipolar switch between the mains and the unit.
It is also essential to connect the unit to a properly earthed system.
Lamborghini Calor, s.p.a. will not be held liable for damages to persons or things caused by the failure to
connect the unit to a properly earthed system.
PRINCIPLE WIRING DIAGRAM
LEGEND
IG Main switch
TS Safety thermostat
TM Minimum temp. thermostat 45°C
TA Room thermostat
IB Burner switch
SB Burner blocking-mode light
SL Lights
Ch Hour meter (optional)
Burner connector
2ª flame
PI
IPI
TRC
(TR1-TR2)
F4/K4
L-N-N-20 Connection terminal board
System pump
Sys. pump switch
Thermostat 2 stages 1° - 2° flame
(3°-85°C t 1°-2° flame = 7°C)
Connection thermoregulation RVP