Advertisement
Serial Plug-and-Play Device Detection
(continued)
1. Attach the serial device to the USB Serial Adapter.
2. Right-click the "My Computer" icon on your desktop.
3. Click "Properties" from the menu that appears.
4. Click the "Device Manager" tab on the System
Properties page.
5. Click "Refresh".
Your Plug-and-Play device should be detected and you may be
asked for a device driver if it has not been previously installed.
Follow the instructions that came with your serial device to
complete the installation.
Using Non Plug-and-Play Devices
Adding Non-Plug-and-Play (Legacy) Devices
Non-Plug-and-Play devices must be added through the "Add
New Hardware Wizard" in the "Control Panel". Using this
wizard, follow the installation instructions that came with
your device.
24
Advertisement
