Advertisement
Software Installation (continued)
Windows
®
should copy all the files it needs and install the
®
Multi-port Hub completely. Windows
will begin installing the
USB COM ports as COM_A and COM_B on your computer,
where A and B are unused COM ports (A and B can be any
number from 2 to 10). It will also finish installing the Parallel
Port. You can verify whether all the ports on the Multi-port Hub
are installed by looking in your "Device Manager". To get to
"Device Manager" click on Start, select Settings, then click on
Control Panel. Look for the "System" icon then double click it.
On the Applet that appears select the "Device Manager" tab.
Once you are on "Device Manager", click on the "Plus" sign on
the left side of "Universal Serial Bus Controller"; this will
expand it. Under "Universal Serial Bus Controller" you should
see the following:
a) General Purpose USB Hub
b) USB to Serial Converter
c) USB to Serial Converter
To verify that the Printer Port is installed, click on the plus sign
to the left of USB Parallel Printer. You should see the following:
a) Belkin USB Parallel Printer Adapter 2.02 (LPTUSB1)
10
Advertisement
