Advertisement
Software Installation (continued)
Windows
®
should copy all the files it needs and install the
Multi-port Hub completely. Windows will start installing the USB
COM ports as COM_A and COM_B on your computer, where A
and B are unused COM ports (A and B can be any number from
2 to 10). It will also finish installing the Parallel Port. You can
verify whether all the ports on the Multi-port Hub are installed
by looking in your "Device Manager". To go to "Device
Manager" click on Start, select Settings, then click on Control
Panel. Look for the "System" icon then double click it. On the
Applet that appears select the "Device Manager" tab. Once
you are on "Device Manager", click on the "Plus" sign
on the left side of "Universal Serial Bus Controller"; this will
expand it. Under "Universal Serial Bus Controller" you should
see the following:
a) Belkin USB Printer Adapter V2.03 (LPTUSB1)
b) Generic USB Hub
c) USB to Serial Converter
d) USB to Serial Converter
19
Advertisement
