P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 1 INTRODUCTION Congratulations and thank you for purchasing the Belkin Hi-Speed USB 2.0 4-Port Hub (the Hub). The Hub provides four downstream USB ports that offer backward-compatible, Plug-and-Play connectivity with all USB devices, including USB 1.1 (or low- and full-speed) devices, as well as with USB 2.0 (or high-speed) devices.
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 2 Features • Compliant with Universal Serial Bus specification 2.0 (data rate 1.5/12/480Mbps) • Backward-compatible with Universal Serial Bus specification 1.1 (data rate 1.5/12Mbps) • Compatible with Windows® 98 SE, Me, 2000, and XP • Approved by USB Implementers Forum (USB-IF) •...
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 3 Technical Specifications Upstream Ports Downstream Ports Power Mode Per-Port Voltage Per Port Current Operating Temperature Storage Temperature Enclosure Power Supply Output: Plug Size: Plug Polarity: Main Power LED Color Definitions: Port Status LED Color Definitions: Green Amber OVERVIEW...
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 4 Important Note: Please do not connect any USB devices to the Hub until instructed to do so in step 4 of this installation procedure. 1. Plug the AC adapter into a wall outlet, or surge suppressor. Plug the DC connector into the DC Power Jack found on the side of the Hub.
Page 9
PCI card vendor for an updated USB 2.0 driver. The Belkin USB 2.0 driver supports all competitive cards based on the NEC host controller with the exception of Adaptec. The most recent Belkin driver is available at www.belkin.com.
Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.