Lcd Adjust Screen Navigation - Invacare SOLO2 Quick Reference Manual

LCD Adjust Screen
The LCD Adjust screen allows user to change the brightness
and contrast of the screen (FIGURE 1.2).
Mode/Return/
Highlight Button

LCD Adjust Screen Navigation

NOTE: For this procedure, refer to FIGURE 1.2.
1. Perform one of the following, while the LCD Adjust screen
is displayed:
A. Tap the Return/Highlight Button
highlight bar from left to right, or right to left.
B. Tap the Up/Increase Button
Button
"LEFT SIDE" of the screen to move the highlight bar up
or down.
C. Tap the Up/Increase Button
Button
SIDE" of the screen to change the value of the item
highlighted.
D. Hold down the Mode/Return/Highlight Button
continue scrolling through the three menu screens.
NOTE: If no buttons are pressed for approximately 10 seconds, the
screen will change back to the Standby/Normal Operating screen.
Any changes made will NOT be saved.
Part No 1163224
FIGURE 1.2 LCD Adjust Screen
while the black highlight bar is on the
while the highlight bar is on the "RIGHT
or the Down/Decrease
or Down/Decrease
2 SOLO ™ Quick Reference Guide
2
Up/Increase
Button
Down/Decrease
Button
to move the black
to