Pc Connection Using Spcs - Micro Direct MicroLoop Operating Manual

The batteries will take approximately 4 hours to become fully
charged.
Note: Turn off the mains supply or remove the MicroLoop from the
charger once the battery display shows fully charged. Leaving the
MicroLoop on charge in the cradle may diminish the battery life.
Note: Use only the AC adapter supplied. Use of any other type
may cause permanent damage to the MicroLoop and cause a fire
or electrical hazard. Do not plug in and remove the power lead
from the AC adapter repeatedly.
Please Note: Dispose of the waste battery in accordance with EU
Waste Battery Regulations.

PC connection using SPCS

The Spirometry PC Software (SPCS) is an easy to use PC based
windows application that interfaces to the MicroLoop via the USB
port. It incorporates a database into which patient details can be
entered and downloaded to the MicroLoop or test results may be
uploaded from the MicroLoop to the PC.
Using SPCS and the MicroLoop, live blows can be performed with
the PC directly controlling the operation of the MicroLoop.
The results and graphs produced are displayed directly on the PC
screen.
The spirometer is connected from the USB port on the PC, to the
USB port on the cradle using the USB cable provided with the
Spirometry PC Software.
Note: Keep the PC out of reach of the patient at all times.
It is recommended that while the unit is connected to a computer,
the MicroLoop remains in the cradle.
21