Table of Contents
Advertisement
Using Wired Devices
If you' d like to use an audio source with your BryFi that does not have wireless capability, your BryFi has both
analog and optical input jacks. To use the analog or optical input, simply connect your source to one of the input
jacks with an appropriate cable. Press the input selector button on the transmitter until the appropriate input
indicator light is on.
(Note: if playback from the WebUI, AirPlay, or uPnP is started while in analog input mode, your BryFi will
automatically switch off the analog input and begin playback of the selected stream.)
Playing to Multiple BryFis
If you have more than one BryFi and would like to play the same music on multiple devices, a Playback Group can
be created. To do this, navigate to the Playback page of the BryFi WebUI. At the bottom of the page you will see all
the BryFi systems that are available on your network (Note: all systems must be powered on and connected to the
same WiFi network and each system should be given a unique name). Click on the BryFi with access to the music
that you' d like to play and start playback. Next click on the Edit Group button on the right side of the Playback
page. You will now see each available BryFi listed on a new page and the system currently playing music will show
the track information next to Now Playing. To create a group, simply click and hold on the system you' d like to
group and drag it on top of the system with music currently playing. You will see the single "Bryston" icon change
to two icons. Each system will now have its own volume control slider to allow the volume of each individual
system to be changed. Additional systems may be added to the group by dragging and dropping onto the group as
described above. Any individual system can be removed from the group at any time by clicking the trash bin icon
next to that system.
Turning Off Your BryFi
Your BryFi contains a computer, and computers need to be shut down properly. When you're finished listening to your BryFi
and wish to turn it off, simply press the white power button. After approximately 20 seconds the green power LED will turn off,
indicating the system has turned off.
Note: Avoid unplugging your BryFi before shutting it down as shown above.
7
Advertisement
Table of Contents
