Table of Contents
Advertisement
Best Locations for your BryFi
-
Place your BryFi in an open area where there are few obstructions and away from metallic surfaces.
-
Avoid placing your BryFi behind furniture or inside cabinets.
-
Avoid placing your BryFi near microwave ovens, cordless phones, or other sources of electrical or radio interference.
Problems and Solutions
If you experience dropouts or stuttering:
-
Try locating your BryFi and/or the device you are using to play music closer to your WiFi router.
-
Check to see if any devices are being used that could be creating interference (microwave ovens, cordless phones, etc.).
-
Check to see if your WiFi network is under high usage.
-
Prioritize your BryFi in your router settings (check with your router manufacturer for details).
-
Add a WiFi repeater to extend WiFi signal coverage.
If your BryFi isn't responding or cannot be seen from your devices:
-
Press the white power button once and wait until the green light extinguishes. Press the power button again to re-start.
-
If the green light fails to extinguish above, press and hold the white power button until the green light extinguishes (approx.
20 seconds). Press the power button again to re-start.
To update your BryFi software:
-
Open a web browser and enter BryFi.local/ in the address bar (or name.local/ if you have renamed your BryFi). On
Android devices, open the BryFi app.
-
In the top right corner of the page, tap or click on the gear icon. In the menu pop-up, select System.
-
Tap or click on Check Updates. If an update is available, follow the prompts to update your system.
To reset your BryFi to its factory settings:
-
Open a web browser and enter BryFi.local/ in the address bar (or name.local/ if you have renamed your BryFi). On
Android devices, open the BryFi app.
-
In the top right corner of the page, tap or click on the gear icon. In the menu pop-up, select System.
-
Tap or click on Factory Settings and follow the prompts.
8
Tips and Troubleshooting
Advertisement
Table of Contents
