Bryston BryFi Quick Start Manual page 5

1. Open WiFi settings. Your
BryFi will appear under the
caption "SET UP NEW AIRPLAY
SPEAKER" as BryFi-xxxxxx.
3. Your BryFi will join your WiFi
network. Once successfully con-
nected to your own WiFi network,
the blue LED on the front of your
BryFi will stop flashing and you
will hear the xylophone startup
sound.
Your system is now ready to play!
PLAYING A SONG (iOS9 -
iOS10):
Slide up "Control Center" from the
bottom of the screen (iOS9 and
earlier) and swipe left (iOS10).
Tap AirPlay (iOS9 and earlier) or
click the pull down at the bottom
of the pop-up screen (iOS10).
Select the speaker from the list and
tap Done.
Return to your music app and tap
Play.
Section 1 - iOS
2. Tap BryFi-xxxxxx. Select the
desired wireless network. We then
recommend changing the speaker
name to something easy to remem-
ber. Tap Next on the AirPlay Setup
screen.
PLAYING A SONG (iOS12):
Slide down "Control Center" from
the top of the screen and tap the
AirPlay icon. Select the speaker
from the list. Return to your music
app and tap Play.
PLAYING A SONG (iOS11):
Slide up "Control Center" from
the bottom of the screen and swipe
across until you locate the media
player box (seen here in the top right
location of the screen) . Hard press
the media player box and tap the
airplay icon. Select the speaker from
the list. Return to your music app and tap Play.
Accessing the User Interface:
Once the BryFi is connected to your network you can access
the user interface by downloading the latest BryFi App from
the App Store. Make sure your device is connected to the same
network as the BryFi and the BryFi is turned on. Open the
BryFi App to access the user interface.
You can also access the user face from any web browser by
entering http://BryFi-xxxxxx.local/ in the address bar where
BryFi-xxxxxx is the speaker name.
(iOS 11 pictured)
3