Advertisement
Functions
Touch control TC5 (hereinafter refer to as TC5) is a KNX S-Mode multi-functional touch
panel for display, operation and control use. The device is equipped with a 5-inch color
capacitance touch screen with 480 × 854 resolutions.
The device is powered over KNX together with the DC 24...30 V auxiliary supply voltage.
It is operated directly via touch screen. Totally up to 15 function pages and 2 home pages
can be configured via ETS (ETS5.7 or later version).
Functionalities:
●
Home page for navigation purpose
TC5 can set up multiple function pages for control and operation use. To easily navigate
to the desired function page, there are max. 2 home pages with up to 8 icons per page.
The navigation function can be enabled/disabled. If it is disabled, only one cover page is
available showing the date, time and temperature without home page.
●
Multi-function page for lighting, blind, scene and value sending function
Lighting control includes switching and dimming. Blind function covers curtain type
open/close blind, roller shutter type up/down blinds and venetian blind with louver angles
adjustment. Scene operation such as scene recall via short press the scene icon and
storage via long press the scene icon is allowed. Upon demand, up to 120 channels are
available for each individual function.
●
HVAC control covers several applications:
–
–
–
–
Up to 10 pages can be configured as HVAC control.
●
Display air quality value from bus
This page can display various sensor readings such as temperature, relative humidity,
PM2.5, PM10, CO
displayed on one page and totally up to 10 pages can be configured as display page.
●
Display energy metering value from bus
Up to 8 meters can be displayed on one page and totally up to 10 pages can be
configured as display page.
●
Timer (schedule) function
Up to 16 schedules can be set. The schedule can be either daily or weekly and it is
configured via ETS.
●
Event management
Up to 8 sets of event functions are available for setting. Up to 8 output telegrams can be
triggered by calling the scene number. Each output has 3 different data type options.
●
Logic functions
There are up to 8 logic inputs configurable with logic capabilities of doing AND, OR, and
XOR, gate forwarding, threshold comparator and format conversion.
●
RGB, RGBW control and color-temperature adjustment
TC5 can set up dimming control page for 4 types of color lights, which are 3-color RGB
light, 4-color RGBW light, 4-color RGBW light optional with color temperature adjustment
and brightness & color temperature adjustment.
●
Display time, date, temperature, output day/night signal
●
Proximity sensor, adjustment of screen brightness, buzzer
2
Siemens
Smart Infrastructure
General temperature control applies for many room heating / cooling applications
such as FCU, chilled ceiling with 2-point or PI control. It can manage the room
temperature with setpoint (absolute or relative), heating / cooling selection, fan
operation (2 options: When fan operation is disabled, it is completely invisible; When
it is enabled, there are 5 types of fan speed: 3-speed, Off and Auto.), operation mode
changes (4 modes: Comfort, Standby, Economy and Protection).
VRF (Variable Refrigerant Flow) interface allows TC5 to act as the user interface to
operate VRF or VRV (Variable Refrigerant Volume) air conditioning devices with a
VRF gateway.
Enhanced floor heating control has dedicated timer and scene function. There is
indication of heating valve on/off and timer operation on screen.
Ventilation control has manual 3-speed fan switchover as well as auto control
(demand-based ventilation) via PM2.5 or CO
heat recovery, filter life counting, alarm for filter change and filter life reset.
, VOC, AQI, brightness and wind speed. Up to 4 parameters can be
2
value. It supports opening/closing of
2
Datasheet
A6V11980238_en--_a
2021-01-28
Advertisement
