Bartscher 190135 Instruction Manual page 12

•
To clean the pump tube remove it from the support
and remove from the flask. Wash the tube with
running water, put it back into the flask and place in
the support. Do not forget to place the seal back on
the tube before you place it in the flask.
•
After use, always clean the flask with warm water and
mild cleaning agent.
•
Hard water may leave white mineral deposit inside the flask. Coffee usually stains
such deposits and leaves brown stains. To remove such stains use commonly
used cleaning agents.
•
After cleaning rinse the flask with clean water several times and leave it open
until dry.
•
Outer surface of the flask clean with soft damp cloth.
•
Never use coarse cleansing agents that might leave scratches.
•
After cleaning, place the lid with the pump onto the flask.
•
Never place the flask in the dishwasher.
•
Never place the flask in water.
•
Never use aggressive cleaning agents.
•
After use, clean the flask following the above instructions and leave it open
until fully dry.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 8 -
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120