Beko 970463 MB User Manual page 63

Operating the product
When energy saving function is
activated, all symbols on the display
other than energy saving symbol will
turn off. When the Energy Saving
function is activated, if any button is
pressed or the door is opened, energy
saving function will be canceled and the
symbols on display will return to normal.
Energy saving function is activated
during delivery from factory and cannot
be canceled.
3.Quick fridge function
The button has two functions. To
activate or deactivate the quick cool
function press it briefly. Quick Cool
indicator will turn off and the product
will return to its normal settings. (
C
Use quick cooling function
when you want to quickly cool
the food placed in the fridge
compartment. If you want to
cool large amounts of fresh
food, activate this function
before putting the food into
the product.
C
If you do not cancel it, quick
cooling will cancel itself
automatically after 8 hours or
when the fridge compartment
reaches to the required
temperature.
C
If you press the quick cooling
button repeatedly with short
intervals, the electronic circuit
protection will be activated
and the compressor will not
start up immediately.
C
This function is not recalled
when power restores after a
power failure.
4. Fridge compartment
temperature setting button
Press this button to set the
temperature of the fridge
Refrigerator / User Manual
compartment to 8, 7,6, 5,4,3, 2, 8...
respectively. Press this button to set
the fridge compartment temperature
to the desired value. (
5.Vacation Function
In order to activate vacation function,
press the this button (
seconds, and the vacation mode
indicator ( ) will be activated. When
the vacation function is activated, "- -"
is displayed on the fridge compartment
temperature indicator and no active
cooling is performed on the fridge
compartment. It is not suitable to keep
the food in the fridge compartment
when this function is activated. Other
)
compartments shall be continued to be
cooled as per their set temperature.
To cancel this function press Vacation
function button again.
6. Termination of the High
Temperature Warning
In case of power failure/high
temperature warning, you may
delete the warning ( ) by pressing
any button on the indicator or high
temperature alarm off button for 1
second after checking the food inside
the freezer compartment.
Note: Cancelling by pressing any button
is not applicable for every model.
7. Key lock
Press key lock button (
simultaneously for 3 seconds. Key lock
symbol ( ) will light up and key lock
mode will be activated. Buttons will not
function if the Key lock mode is active.
Press key lock button simultaneously
for 3 seconds again. Key lock symbol
will turn off and the key lock mode will
be exited.
19/40 EN
)
) for 3
)