Page 2
We apologize for and bolts. in the nuts. way in. the inconvenience. For more tips, please visit the link below: https://totemmaker.net/blog/totem-mechanics-for-beginners/...
2x O-Shaft Wheel 1x Mini Control Board 1x Rechargeable Battery 1x Rechargeable Battery 1x Mini Servo Motor 1x Mini Servo Motor 2x N20 Motor 2x N20 Motor Bracket 1x Micro Gripper Charger Bracket 1x Mini Screwdriver 1x Totem Wrench 1x Totem Screwdriver...
Page 4
# indicates number of slot. indicates counting 1x Beam 90 mm 5x Nut M3 6x10 direction. 3x 2-Hole Simple 3x Bolt M3x6 Bracket 2x N20 Motor 4x Bolt M1.6x3 Use Mini Screwdriver for the bolts. 2x N20 Motor Bracket Repeat this step twice.
Page 7
1x Mini Servo Motor 3x Nut M3 6x10 2x Bolt M3x8 1x Bolt M3x45 Tighten the bolt fi rmly. 1x Mini Servo Motor Bracket Use wrench for 1x Beam 90 mm 1x Lock Nut M3 Lock Nut. 1x Nylon Spacer 4 mm 1x Nylon Spacer 8 mm Tighten the Lock Nut just enough to get a smooth...
Page 8
1x Beam 90 mm 1x Nut M3 6x10 1x Bolt M2.5x12 1x Bolt M3x10 2x Nylon Spacer 4 mm # indicates number of slot. indicates counting direction.
Page 9
1x Beam 90 mm 2x Bolt M3x20 2x Nylon Spacer 4 mm 2x Nylon Spacer 8 mm 2x Lock Nut M3 1x Step 8 Assembly # indicates number of circular slot. indicates counting direction. Use wrench for Tighten the Lock Nut just Lock Nuts.
Page 15
Use wrench for Nylon Standoff s. 1x Beam 90 mm 2x Bolt M3x6 4x Nut M3 6x10 2x L-Twisted Bracket 2x Nylon Standoff M3x8 # indicates number of circular slot. indicates counting direction. Do not use much force when tightening Nylon Standoff...
CONNECTING ELECTRONICS HOW TO CONTROL? Download Totem app on your smartphone or tablet via App Store or Google Play. Follow the step by step guide to connect your Gripper Bot to your device.
“Inverted”. Write changes by clicking “Save”. Flip it over. A button configuration may be wrong. Reinstall • Totem mobile application in order to reset all the LEDs are flashing when battery is not connected settings. and motors are spined manually.
PRECAUTIONS: ELECTRONICALLY OPERATED PRODUCT Do not give this product to children aged 8 or below. As with all electronic products, precautions should be observed during handling and use to prevent electric chock. Adult supervision required. Note to adults: to ensure that the child’s play is both safe and fun, please review all operating instructions and safety rules with your child. SAFETY WARNINGS: •...
KEEP THIS INTRUCTION MANUAL AND THE PRODUCT BOX AS IT CONTAIN IMPORTANT INFORMATION FOR FUTURE REFERENCE. Due to the continuous product improvement, the pictures on this manual may diff er slightly from the actual product. Please adhere to actual product instead. Totem Maker names and logos are registered trademarks. All rights reserved. WARNING: www.totemmaker.net...