Optional Accessories; Replacing Blades - Makita DJS161 Instruction Manual

Insert the top end of slotted bit screwdriver into the
notch in the tool and remove the holder cap cover by
lifting it up.
2
3
► 1. Brush holder cover 2. Notch 3. Screwdriver
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
1
► 1. Brush holder cap 2. Screwdriver
Reinstall the holder cap cover on the tool.

Replacing blades

The service life of the blades varies in terms of the
workpiece to be cut. The following reference tables
indicate the approximate service life of the blades.
When the blades become dull, ask Makita Authorized
Service Centers to replace the blades.
For Model DJS161
Cutting thickness
Material
Mild steel plate
(SPCC)
Stainless steel plate
(SUS304)
Aluminum plate
(A-5052)
For Model DJS101
Cutting thickness
Material
Mild steel plate
(SPCC)
Stainless steel plate
(SUS304)
1
2
Life of blades
(mm) (m)
1.6 200
1.2 150
2.5 400
Life of blades
(mm) (m)
1.0 120
0.7 50
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Thickness gauge
• Center blade
• Side blade R
• Side blade L
• Hex wrench
• Makita genuine battery and charger
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
9 ENGLISH