®
Bluetooth
Connection
By coupling the charger with a Bluetooth
capable mobile device, data can be transferred between
the charger and the mobile device. For this, download
the FEIN Service App onto your mobile device and fol-
low the instructions of the FEIN Service App.
The FEIN Service App enables:
– the registration of FEIN power tools
– the management of FEIN power tools
– the status check of charger and battery
– access to further information.
The QR Code for the FEIN Service App is available
below:
iOS > V5.0
Repair and customer service.
Once per week; more often in case of frequent usage:
– Keep the contacts in the slide-on shoe clean.
– Only dry-clean electrical contacts.
– Ensure that metal chips do not enter the battery-
charger housing.
If the charger's power cord is damaged, it must be
replaced by a special power cord, available from the
manufacturer or their representative.
®
low-energy
Android > V6.0
Warranty and liability.
The warranty for the product is valid in accordance
with the legal regulations in the country where it is mar-
keted. In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer's warranty dec-
laration.
The delivery scope of your battery charger may include
only a part of the accessories described or shown in this
Instruction Manual.
Environmental protection, disposal.
Packaging, worn out battery chargers and accessories
should be sorted for environment-friendly recycling.
Dispose of batteries only when discharged.
For batteries that are not completely discharged, insu-
late the terminals with tape as a protective measure
against short-circuiting.
en
13