B-SAFE GEN2 FLEXFIT & FLEXFIT PLUS User Guide
3. Press the base firmly
into the vehicle seat
while removing all slack
from the vehicle seat
belt.
ü Check that the vehicle belt is tight, not twisted, and
that the base is secure. The base is secure when
it moves less than 2.5 cm (1 inch) front-to-back or
side-to-side at the vehicle belt path.
ü Recline indicator is still within the acceptable range
after child is secured.
ü Check that the recline angle is correct and confirm
that the red marker is visible between the two lines
on the recline angle indicators.
Base Installation with Lap Belt
CHECKLIST
17