B-SAFE GEN2 FLEXFIT & FLEXFIT PLUS User Guide
2. Move the base up
or down until the
red marker is visible
on the recline angle
indicators while on
the vehicle seat.
If there is a problem achieving the proper recline angle after
installing, try another approved seating position in your
vehicle or:
a. Uninstall the base and lower the recline angle
adjustment foot to the lowest position.
b� Remove the base
from the vehicle
and place a rolled
towel or pool
noodle in the
vehicle seat bight�
c� Place the base against the towel or pool noodle to
level the shell and install.
NOTE: If a towel or pool noodle is needed for the
recline angle, the recline angle adjustment foot on the
base should remain in its lowest position.
IMPORTANT:
seat and the car seat is attached to the base, ensure that
the red marker is visible on the recline angle indicator.
After the child is secured in the infant car
ü
û
ü
û
11