Network Configuration - Belkin OmniView F1DE101N User Manual

Multiple Servers Mode
The Unit can be connected to a KVM switch. During initial setup, the user must
connect a keyboard, monitor, and a mouse to the local port to set up the Unit. After
the initial setup is complete, the user can leave the keyboard, monitor, and the mouse
connected to the local port for local monitoring.
Ethernet Configurations
We recommend connecting the Unit as shown below. In this example, the Unit will
continue to monitor the servers even if the firewall fails or the connection to the
firewall goes down as shown in Fig. 9.
Server 1 Server 2 Server 3 Server 4 Server 5 Server 6
Fig. 9
Fig. 9
The Unit and server connected to different hubs as shown in Fig. 10.
Hub
Fig. 10
Fig. 10
Another application for the Unit would be to connect a computer that does not have a
network connection on the Web, as shown in Fig. 11.
ENTERPRISE
Remote IP
Console
Fig. 11

NETWORK CONFIGURATION

Firewall
KVM Switch
ENTERPRISE
Remote IP
Console
ENTERPRISE
Remote IP
Console
Ethernet/TCP/IP
KVM
Server
13
Internet
Server 7 Server 8
Server
Hub
Hub