Heat Sink; Removing The Heat Sink - Uma - Dell Vostro 15 3510 Service Manual

Steps
1. Align and place the fan on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x5) to secure the fan to the palm-rest and keyboard assembly.
3. Connect the fan cable to the connector on the system board .
Next steps
1. Replace the base cover.
2. Exit service mode.
3. Replace the SD card.
4. Follow the procedure in

Heat sink

Removing the heat sink - UMA

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Enter service mode.
4. Remove the base cover.
About this task
The following images indicate the location of the heat sink and provides a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 39