Belkin OmniView MATRIX F1D208-OSD User Manual page 15

F1D208-OSD_EU_man.qxd 4/20/00
• You can navigate through the active ports by using the arrow keys. The OSD menu will only allow you to move to
active ports.
NOTE: If a computer is connected and is powered up, but the OSD menu does not display a " ", you will have
to RESET the OmniView
pressing the BANK/ and SCAN buttons on the front panel.
• Pressing the INSERT key allows you to rename the port. Press ENTER to complete.
The main OSD screen menu
is shown on the right. It
shows the currently selected
BANK. If you have only one
OmniView ™ MATRIX, it will
say "BANK 0".
The current selected port is
shown in RED.
A " " indicates that the
computer connected to that
port is powered up.
NOTE: Inadvertently pressing the SCROLL LOCK, SCROLL LOCK, DELETE keys will erase any given names on the
OSD menu.
• Pressing the ESC key exits the current screen.
• To view a different BANK, pressing the PAGE UP key goes to a previous BANK, while the PAGE DOWN key
brings you to the next BANK.
• Once you have selected a computer on the menu, press ENTER to switch to that port.
• Pressing the TAB key opens up the Function menu. In this menu, you can select the
DISPLAY TIME.
4:37 PM Page 13
Usage
(continued)
™ MATRIX to re-detect the powered computers. This is done by simultaneously
Currently
Belkin: F1D208-OSD
selected
Port is
1. WIN98
in RED
2. NT SERVER
3. MAC OS8
4. NET SRVR
5. UNIX SRVR
6. CHANNEL 6
7. CHANNEL 7
Currently
8. CHANNEL 8
selected
Bank
Address
(TAB): FUNCTION / HELP
:PgUp
13
" "
indicates
PC is powered
BANK 0
:PgDn
SCAN TIME and the
En