AEG MCD2665E User Manual page 33

9.3 Electrical connections
WARNING!
THIS APPLIANCE MUST BE
EARTHED
The manufacturer declines any liability
should this safety measure not be
observed.
If the plug that is fitted to your
appliance is not suitable for your socket
outlet, it must be cut off and the
appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be
disposed of to prevent the hazard of
shocks in case it should be plugged into
a 13 A socket in another part of your
home.
IMPORTANT
The wires in the mains lead are
coloured in accordance with the
following code:
GREEN AND YELLOW EARTH
BLUE
BROWN
If you fit your own plug, the colours of
the wires in the mains lead of your
appliance may not correspond with the
markings identifying the terminals in
your plug, proceed as follows:
• Connect the green and yellow (earth)
wire to the terminal in the plug which
is marked with the letter "E" or the
earth symbol (
and yellow.
• Connect the blue (neutral) wire to the
terminal in the plug which is marked
with the letter "N" or coloured black.
• Connect the brown (live) wire to the
terminal in the plug which is marked
with the letter "L" or coloured red.
ENGLISH 33
NEUTRAL
LIVE
) or coloured green