Maintenance; Battery Removal - ElectrIQ E-SC1-V2 User Manual

MAINTENANCE

The scooter requires routine cleaning and maintenance.
•
Before any work is carried out on the scooter, ensure that the charging cable is not connected
and that the scooter is powered off.
•
To clean the scooter, wipe the exterior with a soft damp cloth, then dry immediately.
•
The exterior of the scooter is dustproof and splash proof with a water ingress rating of IPX4.
•
Do not allow water to get inside of the scooter. There is a high risk of the internal electronics
becoming permanently damaged.
•
The tyres on the scooter must be regularly checked for deflation and damage. If the tyres are
deflated, pump them up to the recommended tyre pressure 2.0 bar.

BATTERY REMOVAL

Your scooters battery can be removed using the key provided. The battery can be removed for
storage purposes or replacement. The battery DOES NOT need to be removed for charging. See
storage for correct methods of battery storage.
Insert the key into the lock.
Locate the battery cover behind the front wheel
under the deck and open the battery door
Turn the key anti clockwise and gently slide the
battery out until it disconnects from the rail.
9