Advertisement
Table of Contents
- 1 Table of Contents
- 2 Safety Warnings
- 3 Scooter Diagram
- 4 Assembly
- 5 First Use
- 6 Unfolding the Scooter
- 7 Folding the Scooter
- 8 Turning on and off
- 9 How to Ride
- 10 Tightening the Handlebar Stem
- 11 Display
- 12 Maintenance
- 13 Battery Removal
- 14 Storage
- 15 Technical Specifications
- 16 Support
- Download this manual
Advertisement
Table of Contents
Related Manuals for ElectrIQ E-SC1-V2
Summary of Contents for ElectrIQ E-SC1-V2
- Page 1 USER MANUAL E-SC1-V2 ELECTRIC SCOOTER Thank you for choosing electriQ Please read the manual before using this scooter and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire product range...
-
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS SCOOTER DIAGRAM ASSEMBLY FIRST USE UNFOLDING THE SCOOTER FOLDING THE SCOOTER TURNING ON AND OFF HOW TO RIDE TIGHTENING THE HANDLEBAR STEM DISPLAY MAINTENANCE BATTERY REMOVAL STORAGE TECHNICAL SPECIFICATIONS SUPPORT... -
Page 3: Safety Warnings
SAFETY WARNINGS • Carefully read the user manual before use to avoid the risk of injury. Keep the user manual safe for future reference. • The scooter can only be used by people aged 12 years old and over. Persons with reduced physical, sensory or mental capabilities or who lack experience and knowledge can also use this scooter if they are supervised, or have been given the correct instructions concerning the use of the scooter and... -
Page 4: Scooter Diagram
BATTERY SAFETY • The scooter comes supplied with a lithium battery. Care must be taken with the battery and charging to maintain its lifespan. • Do not expose the scooter or battery to naked flames or extreme heat. • Do not expose the scooter or battery to extreme cold. •... -
Page 5: Assembly
ASSEMBLY To assemble the handlebar, it must first be fitted into the top of the handlebar stem. Slide the silver base of the handlebars into the stem and align the 4 holes (2 on either side). Then insert the 4 bolts provided loosely into the holes. Once all 4 are in position tighten them to fix the handlebar into place, taking care not to damage any of the interior wiring. -
Page 6: Unfolding The Scooter
UNFOLDING THE SCOOTER From the folded position, unclip the handlebar from the hook on the rear mudguard. When the handlebar is in the vertical position, lock it into place using the clamp on the front of the handlebars. Ensure that the clamp is fully secure before using. -
Page 7: Turning On And Off
TURNING ON/OFF IMPORTANT: Make sure the scooter is upright and placed on a flat surface before starting. Press and hold the power button below the handlebar, for around 2 seconds to turn on the scooter. Press and hold the power button again to turn off the scooter. HOW TO RIDE 1. -
Page 8: Display
DISPLAY • The LED display on the handlebar will turn on after powering up the scooter. • The scooters battery level is displayed at the bottom of the display. During use, the number of bars on the battery level indicator will decrease. •... -
Page 9: Maintenance
MAINTENANCE The scooter requires routine cleaning and maintenance. • Before any work is carried out on the scooter, ensure that the charging cable is not connected and that the scooter is powered off. • To clean the scooter, wipe the exterior with a soft damp cloth, then dry immediately. •... -
Page 10: Storage
1170*420*1145mm Folded body dimensions 1170*420*495mm Net weight 16.5 kg Tyre Size 8.5 inches electriQ UK SUPPORT 0330 390 3061 Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA PRODUCT DISPOSAL Do not dispose this product as unsorted municipal waste.