Related Manuals for ElectrIQ E-SC02PRO
Summary of Contents for ElectrIQ E-SC02PRO
- Page 1 USER MANUAL E-SC02PRO ELECTRIC SCOOTER Thank you for choosing electriQ Please read the manual before using this scooter and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire product range...
-
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS SCOOTER DIAGRAM ASSEMBLY FIRST USE UNFOLDING THE SCOOTER FOLDING THE SCOOTER TURNING ON AND OFF HOW TO RIDE TIGHTENING THE HANDLEBAR STEM DISPLAY MAINTENANCE STORAGE TECHNICAL SPECIFICATIONS SUPPORT... -
Page 3: Safety Warnings
SAFETY WARNINGS Carefully read the user manual before use to avoid the risk of injury. Keep the user manual safe for future reference. The scooter can only be used by people aged 12 years old and over. Persons with reduced physical, sensory or mental capabilities or who lack experience and knowledge can also use this scooter if they are supervised, or have been given the correct instructions concerning the use of the scooter and... -
Page 4: Scooter Diagram
BATTERY SAFETY • The scooter comes supplied with a lithium battery. Care must be taken with the battery and charging to maintain its lifespan. • Do not expose the scooter or battery to naked flames or extreme heat. • Do not expose the scooter or battery to extreme cold. •... -
Page 5: Assembly
ASSEMBLY To assemble the handlebar, it must first be fitted into the top of the handlebar stem. Slide the silver base of the handlebars into the stem and align the 4 holes (2 on either side). Then insert the 4 bolts provided loosely into the holes. Once all 4 are in position tighten them to fix the handlebar into place, taking care not to damage any of the interior wiring. -
Page 6: Unfolding The Scooter
UNFOLDING THE SCOOTER From the folded position, unclip the handlebar from the hook on the rear mudguard. When the handlebar is in the vertical position, lock it into place using the clamp on the front of the handlebars. Ensure that the clamp is fully secure before using. -
Page 7: Turning On And Off
TURNING ON/OFF IMPORTANT: Make sure the scooter is upright and placed on a flat surface before starting. Press and hold the power button below the handlebar, for around 2 seconds to turn on the scooter. Press and hold the power button again to turn off the scooter. HOW TO RIDE 1. -
Page 8: Display
DISPLAY • The LED display on the handlebar will turn on after powering up the scooter. • The scooters battery level is displayed at the bottom of the display. During use, the number of bars on the battery level indicator will decrease. •... -
Page 9: Maintenance
Keep the scooter inside its own packaging, or cover it to prevent dust build up. • Keep the scooter indoors at all times when not in use. • TECHNICAL SPECIFICATIONS Model name E-SC02PRO Maximum loading 120 kg Maximum speed 25 Km/h Maximum Range... -
Page 10: Support
UK SUPPORT 03303903061 Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA PRODUCT DISPOSAL Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary.